Images are representations only.
Inductive Sensor
Brand: Pepperl+Fuchs IncSpecifications
- 3-wire DC
- Sensing range 2 mm
- Stainless steel sensing face
- Ferrous targets
- 150 mm male cordset with POC jacket
- Weld field immune
- Weld slag resistant coating
Specifications
Brand
Switching Function
- Normally open (NO)
Output Type
- PNP
Rated Operating Distance
- 2 mm
Installation
- flush Note: Sensor can be recessed 0.5 mm in steel with no effect on the sensing field.
Assured Operating Distance
- 0 to 1.62 mm
Actuating Element
- Ferrous targets
Reduction Factor rAl
- 0
Reduction Factor rCu
- 0
Reduction Factor r304
- 0.6 - 0.8
Reduction Factor rBrass
- 0
Operating Voltage
- 10-30 Vdc
Switching Frequency
- 80 Hz
Hysteresis
- typ. 5 %
Reverse Polarity Protection
- reverse polarity protected
Short-Circuit Protection
- pulsing
Voltage Drop
- ≤ 2 V
Operating Current
- ≤ 200 mA
Current Consumption
- ≤ 22 mA
Off-State Current
- ≤ 10 µA
No-load Supply Current
- ≤ 15 mA
MTTFd
- 828 a
Mission Time (TM)
- 20 a
Diagnostic Coverage (DC)
- 0 %
Operation Indicator
- Dual LED green: power yellow: Output
Standards
- EN 60947-5-2:2007 IEC 60947-5-2:2007
CCC Approval
- CCC approval / marking not required for products rated ≤ 36 V
Ambient Temperature
- -10 to 70° C (14 to 158° F)
Shock Resistance
- 30 g 11 ms 3 planes
Connection Type
- 150 mm POC cable with 3-Pin (gold-plated) M12 x 1 connector
Core Cross Section
- 3 x 0.14 mm2
Housing Material
- Xylan coated - Stainless Steel 1.4305 / AISI 303
Sensing Face
- Xylan coated - Stainless Steel 1.4305 / AISI 303
Degree of Protection
- IP67
