Images are representations only.
WP4P Pulse Rate Converter
Brand: Yokogawa Electric Corporation
The WP4P is a compact, front terminal connection type pulse rate converter that receives contact or voltage pulses from a field and converts them into an isolated transistor-contact pulse at a preset pulse rate.
Features- 2000 V AC withstand voltage specifications are available upon requests.
Specifications
Consumption
- 6 VA at 100 Vac - Power Consumption
- 60 mA at 24 Vdc - Current Consumption
Electrical Rating
- 1 mA at 24 Vdc - Contact Input Detection Power Supply
Enclosure, Body Material
- ABS Resin
Frequency
- 0 to 10,000 Hz - Max.
- 0 to 16.6 Hz - 100 % Output Frequecy
- Less than 10 kHz - Output Frequency
Humidity
- 5 to 90 % RH, Non-Condensing
Input Signal
- -1 to 8 Vdc - Low Level (VL)
- 2 V or more - High Level (VH)
- Contact Pulse
- Voltage Pulse
Insulation Resistance
- 100 MΩ or more at 500 Vdc between Input & Output, Input & Power Supply, Input & Ground, Output & Power Supply, Output & Ground, & Power Supply & Ground
Mounting
- DIN Rail Mounting
- M4 Screw x 4
- Rack-Mounted
- Wall Mounted
Operating Temperature
- 0° to 50° C (32° to 122° F)
Output
- 100 Vac / 200 mA - Contactless AC Switch Output Contact Capacity
- 30 Vdc / 200 mA - Open Collector Output Contact Capacity
Output Format
- Contactless AC Switch
- Open Collector
Power Supply
- 24 Vdc ± 10 %
- 85-264 Vac, 47 to 63 Hz
Power Supply Effect
- ± 0.1 % of Span or Less for Fluctuation within the Operating Range of Power Supply Voltage Specification
Pulse Range
- 0.0001 to 0.9999 - Pulse Rate
- 30 ± 3 ms - On-Time Pulse Width
- 40 µs or more - Output ON Pulse Width
Resistance
- 10 kΩ - Input Resistance
Resolution
- 0.0001 - Setting Resolution for Pulse Rate
Supply Voltage
- 1,500 Vac/minute - AC & DC Drive Withstand Voltage
- 500 Vac/minute between Output & Power Supply - Withstand Voltage for DC Drive
