Images are representations only.
DV/ZT Pressure or Vacuum Relief Valve, In-Line
Brand: PROTEGOThe Protego in-line valve DV/ZT is a state-of-the-art pressure and vacuum relief valve.
Typically the valve is installed in the in-and out-breathing lines of tanks, vessels and process apparatus to protect against unallowable high and low pressure.
The valve prevents emission losses almost up to the set pressure and provides protection from product entry into the system.
Due to its design the lower valve pallet is one size smaller than the upper valve pallet.
Features- "Full lift type" technology valve utilizes only 10% overpressure to reach full lift
- High performance seal reducing product loss below EPA's 500 ppm rule preventing environmental pollution
- Based on 10% technology the set pressure is close to the opening pressure which results in best possible pressure management of the system compared to conventional 40% or 100% technology valves
- Optimized flow performance, which reduces capital cost to a minimum as smaller sized valves may be used
- Can be installed in explosion hazardous areas
- Housing designed to psi: 150 (kpa: 1,034, bar: 10.34) (PN 10)
- Maintenance friendly design
Displaying prices & availability for Ohio, United States in USD. Change location.
Models matching criteria: 2
Out of Stock
Does not ship to OH, United States
Out of Stock
Does not ship to OH, United States
Specifications
Brand
Approvals & Certifications
- ISO 6358, ISO 16016
- TÜV (Technischer Uberwachungsverein)
Diaphragm Material
- FEP
Enclosure Finish
- ECTFE
Enclosure, Body Material
- Stainless Steel
- Steel
Flange Size - 1-1/2” (DN 40)
- 1-1/2" (DN 40) - 150# ASME B16.5
Flange Size - 2” (DN 50)
- 2" (DN 50) - 150# ASME B16.5
Flange Size - 3” (DN 80)
- 3" (DN 80) - 150# ASME B16.5
Flange Size - 4” (DN 100)
- 4" (DN 100) - 150# ASME B16.5
Flange Size - 6” (DN 150)
- 6" (DN 150) - 150# ASME B16.5
Flange Type
- Raised Face (RF)
- Smooth Finish
Gasket Material
- PTFE
Materials of Construction
- Heating Jacket, Valve Pallet: Stainless Steel
- Heating Jacket: Steel
- Valve Pallet: Aluminum
Pressure Range
- psi: -0.72 to 0.72 (Kpa: -5 to 5, Mbar: -50 to 50) - Lower Valve Pallet
- psi: -0.870 to 0.870 (kPa: -6 to 6, Mbar: -60 to 60) - Upper Valve Pallet
Seat / Seal Material
- Seal: FEP
- Seal: Metal
- Seal: PTFE
- Valve Seat: Stainless Steel
