Images are representations only.
FN510 Field Wireless Multi-Function Module
Brand: Yokogawa Electric CorporationField Wireless Multi-Function Module FN510 with “Field Wireless Communication Module FN110” is connectable with a field wireless network as a field wireless device.
This product acquires sensor data from a connected sensor and transmits it to a field wireless network through FN110.
Refer to General Specifications of “Field Wireless Communication Module FN110” for an overview and detailed information.
Features- Various Input / Output functions
- Analog input, digital input/output or pulse input are selectable (Measurement code: A). ACAI function; from the AC voltage to dedicated accelerometer input, acceleration or velocity can be measured (Measurement code: C).
- Connect various sensor to the field wireless network
- This product transmits sensor value acquired from a 4-20 mA analog device (Measurement code: A) or a dedicated accelerometer (Measurement code: C) to the host system via field wireless network.
- Installation flexibility
- Cable elimination allows installing a device at locations where it was previously either inaccessible or costprohibitive because of cable management and cost.
- Small and lightweight housing with LCD
- This product has a small and lightweight housing with a built-in LCD that displays the process data and communication status.
Specifications
Accuracy
- ± 16 μA - Analog Input
Approvals & Certifications
- ATEX Intrinsically Safe
- CE EN 61010-1
- CSA IEC 60529
- EMC EN 61326-1 Class A, EN 55011 Class A
- FM Intrinsically Safe
- IEC Ex Intrinsically Safe
Battery Life
- 10-Years - when Using Analog or Digital Input, Update Period: 10 seconds
- 2-Years - when Using Digital Input, Update Period: 10 seconds
- 3-Years - when Using Digital Input, Update Period: 30 seconds
- 7-Years - when Using Analog or Digital Input, Update Period: 5 seconds
Cable Length
- 65.61 ft (20 metres) - max.
Channels
- 1 - Analog, Pulse Input & Digital Output Channel
- 2 - Digital Input Channel
Communication
- Baud Rate: 9600 bit/sec
- Half-Duplex
- ISA100-Wireless
- RS-485
Current
- 125 mA DC - Digital Output, Max.
- 50 mA - Supply Current
Detection Time
- 5 ms min. - Pulse Input
Diagnostics
- Firmware Internal Error
- Memory Error
- Power Failure
- Wired Communication Failure
Display
- 5-Digit Numerical & Status Display
- LCD Display
Electrical Connectors
- 1/2" NPT Female - Vertical Connection
- 5-Pin Round Connector Dedicated
- Blind Plug - Horizontal & Vertical Connection
- G 1/2" Female - Vertical Connection
- M20 Female - Vertical Connection
Enclosure, Body Material
- Plastic
- Polycarbonate
Environmental Protection
- IP66
- IP67
- NEMA 4X
- Water-Proof
Frequency
- 100 Hz - Pulse Input, Max.
Humidity
- 0 to 100 % RH, Non-Condensing - Ambient Humidity (Operating, Storage)
Input
- 0.2 mA - Digital Input (IN1)
- 0 to 25 mA to Analog Input
- 1 mA - Digital Input (IN2)
Input Signal
- 4-20 mA DC - Analog Input
- Dry Contact - Digital Input
Materials of Construction
- 316 Stainless Steel - Wired Tag Plate, Mounting Bracket
Maximum Voltage
- 30 Vdc - Digital Output, Max.
Mounting
- 2" Pipe Mounting Bracket
Mounting Position
- Horizontal
- Vertical
Operating Temperature
- -30° to 80° C (-22° to 176° F) - LCD Visible Range
- -40° to 85° C (-40° to 185° F) - Attitude up to 3,000 metres
Output Format
- Dry Contact - Digital Output (Output Signal)
Power Requirement
- 2 x Primary Lithium Thionyl Chloride Batteries
- 7.2 V, 19 Ah Battery
Resistance
- 10 ohms - Analog Input (Internal Shunt Resistor)
- 200 ohms - Digital, Pulse Input, Max.
- 50 kΩ - Digital, Pulse Input (Min. Off Resistance)
Shock
- 50 G, 11 ms - Shock Resistance
Storage Temperature
- -40° to 85° C (-40° to 185° F)
Supply Voltage
- 3.5 V
Temperature Coefficient
- ± 3.2 µA / 10° C (18° F) - Analog Input
Temperature Effect
- ± 10° C/hour (± 18° F/hour) or Less - Ambient Temperature Gradient (Operating)
- ± 20° C/hour (± 36° F/hour) or Less - Ambient Temperature Gradient (Storage)
- ± 3.2 UA/10° C - Analog Output
Update Time
- 1 to 3,600 seconds
Vibration
- 0.21 mm Peak-to-Peak (10-60 Hz), 3 G (60-2 kHz) - Vibration Resistance
